| |
Essential Tips To Learn And Get A Job As Train DriverA railroad engineer, railway engineer, locomotive engineer, train
operator, train driver or engine driver is a person who operates a
railroad locomotive and train. The engineer is the person in charge of
and responsible for the locomotive(s). He or she is also in charge of
the mechanical operation of the train, the speed of the train and all
train handling. The engineer shares with the conductor/guard, who is in
charge of the train, responsibility for the safe operation of the train
and application of the rules and procedures of the railway company.On
many railroads, the career progression is one that starts as an
assistant conductor (brakeman), conductor and finally, engineer. In the
United States the engineer is required to be certified and re-certified
every 2-3 years. An engineer is responsible for preparing
equipment for service, checking paperwork and the condition of the
locomotives. His/her duties require that he/she control acceleration,
braking and handling of the train underway. He/she must know the
physical characteristics of the railroad, including passenger stations,
the incline and decline of the right-of-way and speed limits. Along
with the conductor, the engineer monitors time to not fall behind
schedule, nor leave stations early. The train's speed must be reduced
when following other trains, approaching route diversions, or
regulating time over road to avoid arriving too early. The engineer
assumes the duties of the conductor if he or she should be
incapacitated.The locomotive engineer is required to have an
intimate knowledge of track geometry including signal placement so as
to be able to safely control their train.Maintaining concentration is of critical importance in this role.What qualifications and experience will employers look for?You
do not always need set qualifications to get into this type of work,
although most employers will expect you to have a good general standard
of education, including maths and English GCSEs. Some mechanical or
electrical knowledge may also be useful.You can apply directly
to train operating companies for details of any vacancies.
Alternatively, you could start work in the rail service in another job,
for example, as part of the station staff or maintenance crews, and
then apply for trainee driver posts when they come up. Train companies
often promote from within.You normally have to be at least 21
to work as a train driver on the national rail network. If you are aged
between 18 and 21, you may be able to train and work in yards and
depots away from passenger lines. To work on the London Underground you
must be at least 18.If you are successful in your initial application, you will be invited to a training centre where you would sit tests on:Basic mechanical knowledge, ability to recall information, reaction times, Concentration skills. If you pass these tests, you would then go on to the interview stage.You
will also have to pass a medical, which will test your fitness levels,
eyesight, colour vision and hearing. Employers have strict rules on
drug and alcohol abuse, and can carry out random tests at any time. |
|
